|
Product Details:
|
| Appearance: | Polyol Is Milky White Liquid, ISOCYNATE Is Transparent Liquid | Flash Point: | High |
|---|---|---|---|
| Odor: | Very Less | Product Name: | Polyol And Isocyanate |
| Shelf Life: | 1 Year In The Original Drum | Stability: | Stable |
| Storage Conditions: | Cool, Dry Place | Viscosity: | Low Visicosity |
| Highlight: | Polyurethane Polyol Isocyanate For Memory Foam,ISO9001 Polyurethane Polyol Isocyanate,Polyol Isocyanate memory foam raw material |
||
JYM-A/JYM-B for memory foam
1 . JYM -A is milky vi scous liquid . A component will be layered if long time storage , Pl s sh ake it evenly be fore process .JYM -B is light brown liquid . Th ey are used to produce the memory foam , such as sl ow rebound pillow foam , sl ow rebound neck pillow.
2 . Operation
Condition
|
Type Condition |
JYM-A |
JYM- B |
|
Reaction Ratio (by weight) |
100 | 50~55 |
| Material temperature (℃) | 30~ 35 | 30~35 |
| C ream time (s) | 16~ 18 | |
| R ise time (s) | 40~50 | |
| tack -free time (s) | 180~240 | |
| Density (g/cm3 ) | 0 .06~0 .08 | |
| Demould time (min) | 5 | |
3. Not es
( 1) Pl ease adjust pigment's ratio according to pigment's type when necessary. Pigment must be added in A component .
(2) Process temperature of JYM -A should not be high er than 70 ℃ .
(3) Pl ease wear prot ective gl asses , mask s , solvent resi st ant gl oves and other prot ective equipment wh en use the mat eria l s , especi ally B component can react with wat er vi ol ently. So pl ease take care to prot ect the mucosal part s (eye etc .) and skin .
(4) Materia l A, B and cat alyst should be prot ecte d from moi sture contamination .
4. Package& Shelf life
A component is 210kg per drum , B component is 235kg per drum .
Shelf life is 12 months in original drum
5 .St at ement
Th e above data is only for reference and the specific data will be subject to actual processing . Our company’s techni cal opini on whether in oral , written or experiment is all out of sincerity, but do not make any guarant ee . Customers who use our company's product s have the responsibility to experiment to verify whether is suitable for the specifie d process conditions and purposes .
Contact Person: Waner
Tel: +86-18653372731
