|
Product Details:
|
| Appearance: | Transparent Liquid | Product Name: | Mould Release Agent Oil Base |
|---|---|---|---|
| Solubility: | Insoluble In Solvent | Specific Gravity: | 0.985 |
| Storage Conditions: | Store In A Cool, Dry Place | Application: | For The Shoe Sole Production |
| Ratio: | 30:1 By MC | Original: | Original Material |
| Highlight: | Mould Release Agent Oil Based,polyurethane mold release agent Oil Based,Shoe Sole polyurethane mold release agent |
||
TDS Release agent PU-1032
Mould release agent oil base for the shoe sole
Characteristic:
The PU-1032 is a kind of release agent which is combined by silicone resin and Silicon oil
The main components are MQ Silicon resin and silane.
It is mainly used for: polyurethane molding, FRP process molding, polydiamide, phenolic, polyester and epoxy resin.
Physical property:
| Item | Data |
| Appearance | Colorless transparent liquid |
| Available content | 100% |
| Flash point | 260 |
| Density | 0.985 |
| Viscosity,25 ℃ ,mm2 /s | 500 |
Operation:
It’s widely used in the shoe sole production,the mold should be completely clean,
degreased, dried and, if possible, heated to above 40 ℃ .
PU-1032 should be diluted in solvent or solvent mixture by the recommended ratio, then it should be applied by brush, cushion or spray gun. The frequency of use is based on the
complexity of the mold and the molding material .
Package:
25kg or 200kg per high quality plastic drums.
Shelf life:
12 months for each product at temperatures between 0° C and 30° C, provided it is stored in a dry place. Once the drums has been opened, the product must be used immediately.
Contact Person: Waner
Tel: +86-18653372731
