|
Product Details:
|
| Appearance: | White Liquid | Product Name: | Mould Release Agent Water Base |
|---|---|---|---|
| Solubility: | By Water | Specific Gravity: | 1.0 |
| Storage Conditions: | Store In A Cool, Dry Place | Application: | For The Shoe Sole Production For The Upper Mould |
| Ratio: | 15-30 1 By Water | Flash Point: | High |
| Highlight: | Mould Release Agent Nonionic,upper and lower mould Release Agent,ISO9001 mold release agent |
||
TDS Release agent PU-7620
Mould release agent water base for the shoe sole for the upper and lower mould
Characteristic:
Pu-7620 is It is a emulsion formed by mixing siloxane and silicone resin. Mainly used for polyurethane soles, self-crust, hard foam and other products, dry surface, light Natural, good alcohol solubility
Physical property:
| Item | Data |
| Appearance | White liquid |
| Available content | 35%~38% |
| Density | About 1.0 |
| Flash point | 260 |
| Emulsifying agents | nonionic |
| Diluent | Water |
Application:
It’s mainly used in the Polyurethane filed and rubber field. It’s can be used to make the shoe sole and the moulded rubber products. It can used as Lubricants and anti-stick agents, It can be used as Release agent for phenolic and epoxy resins.
Operation:
When it is mainly used as an efficient release agent for polyurethane and rubber products, proposed to dilute 15-30 times after the use of water, used in sole mold. Dilution is about 20-25 times. When this product is used for self-peeling products, it can achieve dry and natural bright effect. The recommended dilution ratio is 10-20 times.
Package:
25kg or 200kg per high quality plastic drums.
Shelf life:
12 months for each product at temperatures between 2° C and 30° C, provided it is stored in a dry place. Once the drums has been opened, the product must be used immediately.
.
Contact Person: Waner
Tel: +86-18653372731
